Definition
The SIGN standard nail was designed and began use in 1999 and is a solid stainless steel nail with a 9° proximal bend and 1.5° distal bend, offered in 8 mm to 12 mm diameters and 280 mm to 420 mm lengths. It is an intramedullary nail that is held in place by interlocking screws to stabilize a fractured bone and enable bone healing.
SIGN Nails are held in place with interlocking screws. These screws are inserted through the slots of the nail to stabilize the fractured bone segments. Screws are manufactured in a range of lengths and diameters to fit the bone and fracture type. Depending on the type of fracture and SIGN Nail used, 1 to 4 screws can be used in each surgery.
Definition
Instruments and equipment needed for the placing of the SIGN IM nail. All instruments are non sterile and reusable, they have to be sterilised prior to use.
Instructions for use
SIGN's Target Arm and Slot Finder work together, enabling a surgeon to locate the distal slot in the nail and insert an interlocking screw with tactile feedback, rather than relying on C-arm imaging.
PRODUCT INFO | Quantity | |
---|---|---|
STD
SIGN4005-00506
PILOT REAMER, Ø 6 mm
|
1 | |
STD
SIGN4005-00507
PILOT REAMER, Ø 7 mm
|
1 | |
STD
SIGN4005-00508
PILOT REAMER, Ø 8 mm
|
1 | |
STD
SIGN4005-00509
PILOT REAMER, Ø 9 mm
|
1 | |
STD
SIGN4006-00925
HAND REAMER, 10 mm x 400 mm
|
1 | |
STD
SIGN4006-00926
HAND REAMER, 11 mm x 400 mm
|
1 | |
STD
SIGN4006-00927
HAND REAMER, 12 mm x 400 mm
|
1 | |
STD
SIGN4006-00928
HAND REAMER, 13 mm x 440 mm
|
1 | |
STD
SIGN4006-00929
HAND REAMER, 14 mm x 440 mm
|
1 |
PRODUCT INFO | Quantity | |
---|---|---|
STD
SIGN4002-00673
EXTRACTOR-COMPRESSOR ROD
|
1 | |
STD
SIGN4002-00808
SLAP HAMMER WEIGHT
|
1 | |
STD
SIGN4002-00809
EXTRACTOR ROD CONNECTOR
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY901557
PLASTIC BASE, for plates, big fragments
|
1 | |
STD
STRY901653
PLASTIC LID, for plates, big fragments
|
1 | |
1 | ||
STD
STRY901656
RACK with LID, for form plates, big fragments
|
1 | |
STD
STRY901657
GENERIC PLATE RACK, with lid, big fragments
|
1 | |
STD
STRY901663
PLASTIC LID, for screws rack, big fragments
|
1 | |
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY700358
DRILL BIT, AO fitting, Ø 3.2 mm x 145 mm
|
1 | |
STD
STRY700359
DRILL BIT, AO fitting, Ø 4.5 mm x 145 mm
|
1 | |
STD
STRY702417
DOUBLE DRILL GUIDE for screws Ø 3.2/4.5 mm
|
1 | |
STD
STRY702820
DOUBLE DRILL GUIDE, Ø 3,2 to 6,5 mm
|
1 | |
STD
STRY702822
DRILL SLEEVE HANDLE, double
|
1 | |
STD
STRY702823
DRILL SLEEVE, Ø 3.2 mm, COMPRESSION yellow
|
1 | |
STD
STRY702824
DRILL SLEEVE, Ø 3.2 mm, NEUTRAL, green
|
1 | |
STD
STRY702839
DRILL SLEEVE, Ø 3.2 mm, BUTTRESS, black
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY702808
TAP, AO fitting, Ø 4.5 x 145 mm
|
1 | |
STD
STRY702809
TAP, AO fitting, Ø 6.5 x 145 mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY702927
REPOSITIONING FORCEPS, with points, ratchet
|
1 | |
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY700151
POINTED HOOK
|
1 | |
STD
STRY700668
PERIOSTEAL and FREER ELEVATOR, 190 mm
|
1 | |
STD
STRY700669
PERIOSTEAL ELEVATOR, with ball spike, 190 mm
|
1 | |
1 | ||
1 | ||
STD
STRY702812
COUNTERSINK, Ø 8 mm x 100 mm, AO fitting
|
1 | |
STD
STRY702817
SWANSON REAMER, Ø 8 mm x 100 mm, AO fitting
|
1 | |
STD
STRY702844
SCREWDRIVER, hex 3.5mm x 245 mm, AO fitting
|
1 | |
STD
STRY702854
SCREWDRIVER, hex 3.5 mm x 140 mm, AO fitting
|
1 | |
1 | ||
1 | ||
1 | ||
STD
STRY702904
BENDING IRON (set of 2)
|
1 | |
STD
STRY702912
STRAIGHT BALL SPIKE, AO fitting, 300 mm
|
1 | |
STD
STRY702923
SPIKED DISK
|
1 | |
1 | ||
STD
STRY710341
TEMPLATE compression plate, broad, 10 holes
|
1 | |
STD
STRY710342
TEMPLATE compression plate, broad, 18 holes
|
1 | |
STD
STRY900106
SCREW FORCEPS
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY390164
KIRSCHNER WIRE, Ø 1.6 x 150mm
|
1 | |
STD
STRY390192
KIRSCHNER WIRE, Ø 2.0 x 150mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 | ||
1 | ||
1 | ||
STD
STRY433004
L PLATE, 4 holes, 83 mm, left
|
1 | |
STD
STRY433054
L PLATE, 4 holes, 83 mm, right
|
1 | |
STD
STRY433006
L PLATE, 6 holes, 115 mm, left
|
1 | |
STD
STRY433104
T PLATE, 4 holes, 79 mm
|
1 | |
STD
STRY433105
T PLATE, 5 holes, 95 mm
|
1 | |
STD
STRY433106
T PLATE, 6 holes, 111 mm
|
1 | |
STD
STRY433108
T PLATE, 8 holes, 143 mm
|
1 | |
STD
STRY433056
L PLATE, 6 holes, 115 mm, right
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY343020
CANCELLOUS SCREW, full thread, Ø6.5 x 20 mm
|
1 | |
STD
STRY343025
CANCELLOUS SCREW, full thread, Ø6.5 x 25 mm
|
1 | |
STD
STRY343030
CANCELLOUS SCREW, full thread, Ø6.5 x 30 mm
|
1 | |
STD
STRY343035
CANCELLOUS SCREW, full thread, Ø6.5 x 35 mm
|
1 | |
STD
STRY343040
CANCELLOUS SCREW, full thread, Ø6.5 x 40 mm
|
1 | |
STD
STRY343045
CANCELLOUS SCREW, full thread, Ø6.5 x 45 mm
|
1 | |
STD
STRY343050
CANCELLOUS SCREW, full thread, Ø6.5 x 50 mm
|
1 | |
STD
STRY343055
CANCELLOUS SCREW, full thread, Ø6.5 x 55 mm
|
1 | |
STD
STRY343060
CANCELLOUS SCREW, full thread, Ø6.5 x 60 mm
|
1 | |
STD
STRY343065
CANCELLOUS SCREW, full thread, Ø6.5 x 65 mm
|
1 | |
STD
STRY343070
CANCELLOUS SCREW, full thread, Ø6.5 x 70 mm
|
1 | |
STD
STRY343075
CANCELLOUS SCREW, full thread, Ø6.5 x 75 mm
|
1 | |
STD
STRY343080
CANCELLOUS SCREW, full thread, Ø6.5 x 80 mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY901613
PLASTIC LID, for TRAY, small fragments
|
1 | |
1 | ||
STD
STRY901615
SCREW RACK, with lid, small fragments
|
1 | |
STD
STRY901616
PLATE RACK 1, with lid, small fragments
|
1 | |
STD
STRY901617
PLATE RACK 2, with lid, small fragments
|
1 | |
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY700346
DRILL BIT, AO fitting, Ø 2,0 mm x 125 mm
|
1 | |
STD
STRY700347
DRILL BIT, AO fitting, Ø 2,5 mm x 125 mm
|
1 | |
STD
STRY700348
DRILL BIT, AO fitting, Ø 2,7 mm x 125 mm
|
1 | |
STD
STRY700349
DRILL BIT, AO fitting, Ø 3.5 mm x 145 mm
|
1 | |
STD
STRY702416
DOUBLE DRILL GUIDE for screws Ø 2.7/2.0 mm
|
1 | |
STD
STRY702418
DOUBLE DRILL GUIDE for screws Ø 2.5/3.5 mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY702801
TAP, AO fitting, Ø 2.7 mm
|
1 | |
STD
STRY702802
TAP, AO fitting, Ø 3.5 mm
|
1 | |
STD
STRY702803
TAP, AO fitting, Ø 4 mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY700664
HOHMANN RETRACTOR, 6.0 mm
|
1 | |
STD
STRY700665
HOHMANN RETRACTOR, 8.0 mm
|
1 | |
STD
STRY700666
PERIOSTEAL AND FREER ELEVATOR
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY702926
REPOSITIONING FORCEPS, with points 130mm
|
1 | |
STD
STRY702931
SELF CENTERING REPOSITIONING FORCEPS 175mm
|
1 | |
STD
STRY702932
REPOSITIONING FORCEPS, with serrated jaws
|
1 | |
1 | ||
1 | ||
STD
STRY702944
REPOSITIONING FORCEPS w.ball spike
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY700151
POINTED HOOK
|
1 | |
STD
STRY700153
BALL SPIKE REDUCER, L190
|
1 | |
STD
STRY702427
T-HANDLE, small, Elastosil, AO quick coupling
|
1 | |
1 | ||
STD
STRY702485
SCREWDRIVER hex. 2.5 x 114 mm, AO fitting
|
1 | |
1 | ||
1 | ||
STD
STRY702811
COUNTERSINK, Ø 6.5 x 100 mm, AO fitting
|
1 | |
1 | ||
STD
STRY702901
BENDING IRON
|
1 | |
1 | ||
STD
STRY710305
TEMPLATE compression plate, 8 holes
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY390157
KIRSCHNER WIRE, Ø 1.25 x 150mm
|
1 | |
STD
STRY390164
KIRSCHNER WIRE, Ø 1.6 x 150mm
|
1 | |
STD
STRY390192
KIRSCHNER WIRE, Ø 2.0 x 150mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY430006
COMPRESSION PLATE, WAISTED, 6 holes, 78 mm
|
1 | |
STD
STRY430007
COMPRESSION PLATE, WAISTED, 7 holes, 91 mm
|
1 | |
STD
STRY430010
COMPRESSION PLATE, WAISTED, 10 holes, 130 mm
|
1 | |
1 | ||
1 | ||
1 | ||
1 | ||
STD
STRY431004
OBLIQUE T-PLATE, 4 holes, 53 mm
|
1 | |
STD
STRY431006
OBLIQUE T-PLATE, 6 holes, 70 mm
|
1 | |
STD
STRY431023
STRAIGHT T-PLATE, 3/3 holes, 40 mm
|
1 | |
STD
STRY431024
STRAIGHT T-PLATE, 4/3 holes, 49 mm
|
1 | |
STD
STRY431044
CLOVERLEAF PLATE, 4 holes, 80 mm
|
1 | |
STD
STRY431046
CLOVERLEAF PLATE, 6 holes, 109 mm
|
1 | |
STD
STRY431103
CALCANEUM PLATE, 60 mm
|
1 | |
STD
STRY431104
CALCANEUM PLATE, 70 mm
|
1 | |
STD
STRY430106
RECONSTRUCTION PLATE, 6 holes, 72 mm
|
2 | |
STD
STRY430108
RECONSTRUCTION PLATE, 8 holes, 96 mm
|
2 | |
STD
STRY430110
RECONSTRUCTION PLATE, 10 holes, 120 mm
|
2 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
STD
STRY345416
CANCELLOUS SCREW, full thread, Ø4.0 x 16 mm
|
1 | |
STD
STRY345418
CANCELLOUS SCREW, full thread, Ø4.0 x 18 mm
|
1 | |
STD
STRY345420
CANCELLOUS SCREW, full thread, Ø4.0 x 20 mm
|
1 | |
STD
STRY345422
CANCELLOUS SCREW, full thread, Ø4.0 x 22 mm
|
1 | |
STD
STRY345424
CANCELLOUS SCREW, full thread, Ø4.0 x 24 mm
|
1 | |
STD
STRY345426
CANCELLOUS SCREW, full thread, Ø4.0 x 26 mm
|
1 | |
STD
STRY345428
CANCELLOUS SCREW, full thread, Ø4.0 x 28 mm
|
1 | |
STD
STRY345430
CANCELLOUS SCREW, full thread, Ø4.0 x 30 mm
|
1 | |
STD
STRY345432
CANCELLOUS SCREW, full thread, Ø4.0 x 32 mm
|
1 | |
STD
STRY345434
CANCELLOUS SCREW, full thread, Ø4.0 x 34 mm
|
1 | |
STD
STRY345435
CANCELLOUS SCREW, full thread, Ø4.0 x 35 mm
|
1 | |
STD
STRY345436
CANCELLOUS SCREW, full thread, Ø4.0 x 36 mm
|
1 | |
STD
STRY345438
CANCELLOUS SCREW, full thread, Ø4.0 x 38 mm
|
1 | |
STD
STRY345440
CANCELLOUS SCREW, full thread, Ø4.0 x 40 mm
|
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the small fragments set (SF).
The checklist is divided into small parts to make it more readable and easier to find the required articles:
- trays / racks
- drills
- taps
- retractors
- forceps
- instruments
- kirschner wires
- plates
- cortical screws
- cancellous screws full thread
- cancellous screw partial thread
- washers
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 |
Definition
This checklist is listing the articles which are part of the Stryker Plating Systems (SPS), and more specifically the big fragments set (BF).
The checklist is divided into different small parts to make it more readable and easier to find the required articles:
- trays / racks
- drill instruments
- taps
- forceps
- instruments
- Kirschner wires
- plates
- washers
- cortical screws
- cancellous screws
Instructions for use
A protocol for starting an orthopaedic programme with internal fixation exists for the MSF missions.
See preliminary remarks ISUI
PRODUCT INFO | Quantity | |
---|---|---|
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 | ||
1 |