1. All Products
  2. C - Camps & Construction
  3. WATERPROOFING SET 2 components A&B, for masonry tank, 25kg
Liste de prix publique

WATERPROOFING SET 2 components A&B, for masonry tank, 25kg

https://unicat.msf.org/cat/product/78530
NST CBUICEMEW2C

Valid Article

Hazardous materials and products (identified by their 4-digit transport UN-number) must be transported under certain conditions as specified in the MSDS sheet (Material Safety Data Sheet).
OC subscriptions: included in supply or field order tools (e.g. UniField)
SC subscriptions: included in supply or field tools
OC validations: approved for procurement and use by an OC for international or local orders specifying context and activity in Medical Standard Lists (MSL)
https://www.unicat.msf.org/web/image/product.template/563371/image_1920?unique=aecb383

This combination does not exist.

Add article to list

   
Create Cancel

Add Kit To Wishlist

   
Create Cancel

WATERPROOFING SET 2 components, A & B (masonry tank)

Form

  • Two-component waterproofing system:
    • Component A: cementitious powder (Ciment NF EN 197-1, mineral fillers, chemical additives).
    • Component B: water-based resin dispersion (white milky).
  • Total kit weight: 25 kg (pre-dosed for correct mixing).
  • Final mixed product: paste-like consistency.
  • Colour: powder – white or grey; resin – milky white.
  • Density: powder ~1.4 kg/L, resin ~1 kg/L.
  • Solvent-free, low odor; very low VOC emissions (A+ rating).

Fit

  • Components must be mixed thoroughly to form a homogeneous paste.
  • Can be applied on horizontal, vertical, or overhead surfaces.
  • Suitable for masonry, concrete, cellular concrete, mortars, stone, bricks, and polystyrene surfaces.
  • Designed for water-retaining and pressure-exposed structures: tanks, reservoirs, pools, foundations, tunnels, walls, and floors.
  • Application tools: trowel, brush, roller, or mechanical projection.
  • Can be applied in interior and exterior conditions, temperature range +8°C to +35°C.

Function

  • Provides durable, waterproof protection for masonry and concrete.
  • Resistant to hydrostatic pressure and counter-pressure (up to 6 bars, NF P84-402).
  • Adhesion: excellent on most substrates (>2 MPa).
  • Abrasion and erosion resistant; stable under chemical, atmospheric, and thermal stress.
  • Can be recoated or covered with tiles, screeds, or other finishes (except solvent-based coatings).
  • Application: minimum 2 layers (1.5 kg/m² each); third layer recommended under high water pressure (~1 kg/m²).
  • Full performance after 28 days; light foot traffic: 48 h; water reservoirs: 12 days.
  • Service temperature: -20°C to +80°C.
  • Tools can be cleaned with water while fresh.