INTERFACE RELAY (Finder 385102400060) 240VAC, 6A, modular

Slim interface relay module, 1 change-over contact (SPDT), width 6.2 mm.

Electrical characteristics :

• contact configuration : 1 CO (SPDT)
• rated current : 6 A
• maximum peak current : 10 A
• rated voltage : 250 / 400 VAC
• rated load AC1 : 1500 VA
• rated load AC15 (230 VAC) : 300 VA
• single-phase motor rating (230 VAC) : 0.185 kW
• DC1 breaking capacity (24/110/220 V) : 6 / 0.2 / 0.12 A
• minimum switching load : 500 mW (12 V / 10 mA)
• contact material : AgNi

Coil (version 0 – AC/DC coil, 220 VDC)

• nominal voltage : 220 VDC
• operating range (DC) : 176…264 V
• rated coil power : approx. 0.9 W
• holding voltage : 0.6 UN
• must drop-out voltage : 0.1 UN

Construction :

• relay and socket integrated in one 6.2 mm module
• screw terminals
• integrated coil indication LED
• integrated protection circuit
• plastic retaining clip for instant relay ejection

Per piece.

Electrical interfaces

Coil terminals (control side)

• A1 ,A2

AC/DC version → non-polarized for DC supply.

Contact terminals

• 11 = Common
• 12 = NC
• 14 = NO

Practical wiring explanation

Control wiring (220 VDC control supply)

+220 VDC → A1
0 VDC → A2

When coil is energized :

• LED turns ON
• 11–14 closes
• 11–12 opens

Example : switching a 230 VAC load

Phase (L) → 11
14 → Load
Load → Neutral

When energized, the load is powered.

Fail-safe use (NC contact)

Phase → 11
12 → Load

Relay not energized → circuit closed
Relay energized → circuit open

• provides electrical isolation between 240 VAC control circuit (coil) and output contact circuit
• enables switching of loads up to 6 A at 250 VAC
• interfaces PLC, timer, thermostat, or control relay outputs with field devices
• amplifies low-power control signals to operate higher-power loads
• suitable for switching signal lamps, contactor coils, solenoid valves, and small motors
• designed for reliable operation in industrial control panels and building automation systems